Registrieren Sie sich jetzt!
uri: 0.0.0.0:7070 # uri for ui interval: 10s # control cycle interval # sponsor token enables optional features (request at https://cloud.evcc.io) # sponsortoken: # log settings log: error levels: core: debug lp-1: debug lp-2: debug # mqtt message broker mqtt: broker: x.x.x.x:1883 topic: evcc # root topic for publishing, set empty to disable # user: # password: # influx database (v1) influx: url: http://x.x.x.x:8086 database: xxx user: xxx password: xxx # push messages messaging: events: start: # charge start event title: Charge started msg: Started charging in "${mode}" mode stop: # charge stop event title: Charge finished msg: "Finished charging ${chargedEnergy:%.1fk}kWh in ${chargeDuration}." connect: # vehicle connect event title: Car connected msg: "Car connected at ${pvPower:%.1fk}kW PV" disconnect: # vehicle connected event title: Car disconnected msg: "Car disconnected after ${connectedDuration}" services: - type: pushover app: xxx # app id recipients: - xxx # list of recipient ids # meters meters: - name: e3dc-battery type: custom power: type: modbus uri: x.x.x.x:502 id: 1 register: # manual register configuration address: 40069 type: holding decode: int32s scale: -1 # reverse direction soc: type: modbus uri: x.x.x.x:502 id: 1 # ModBus slave id register: # manual register configuration address: 40082 type: holding decode: uint16 - name: e3dc-grid type: custom power: type: modbus uri: x.x.x.x:502 # IP address of E3/DC device, configured port (default is 502) id: 1 # Configured Modbus Device ID ("Gerät") register: # manual register configuration address: 40073 # (40074 - 1) "Leistung am Netzübergabepunkt in Watt (negative Werte = Einspeisung)" type: holding decode: int32s - name: e3dc-pv type: custom power: type: modbus uri: x.x.x.x:502 # IP address of E3/DC device, configured port (default is 502) id: 1 # Configured Modbus Device ID ("Gerät") register: # manual register configuration address: 40067 # (40068 - 1) "Photovoltaik-Leistung in Watt" type: holding decode: int32s # scale: -1 # reverse direction, because the pv meter is expected to deliver negative values for export and should not return positive values. chargers: - name: go-e type: go-e # go-eCharger uri: http://x.x.x.x # either go-e local address # token: 4711c # or go-e cloud API token cache: 10s # go-e cloud API cache duration vehicles: - name: renault type: renault title: Zoe capacity: 52 # kWh user: xxx # user password: xxx # password region: de_DE # gigya region vin: xxx cache: 5m site: title: xxx# display name for UI meters: grid: e3dc-grid # grid meter pv: e3dc-pv # pv meter battery: e3dc-battery # battery meter prioritySoC: 80 # give home battery priority up to this soc (0 to disable) loadpoints: - title: Carport # display name for UI charger: go-e # charger meters: # charge: charge # charge meter vehicle: renault mode: pv soc: # polling defines usage of the vehicle APIs # Modifying the default settings it NOT recommended. It MAY deplete your vehicle's battery # or lead to vehicle manufacturer banning you from API use. USE AT YOUR OWN RISK. poll: # poll mode defines under which condition the vehicle API is called: # charging: update vehicle ONLY when charging (this is the recommended default) # connected: update vehicle when connected (not only charging), interval defines how often # always: always update vehicle regardless of connection state, interval defines how often mode: charging # poll interval defines how often the vehicle API may be polled if NOT charging interval: 60m min: 0 # immediately charge to 0% regardless of mode unless "off" (disabled) target: 90 # always charge to 100% estimate: false # set true to interpolate between api updates onDisconnect: mode: pv # switch back to pv mode targetSoC: 90 # charge fully phases: 1 # ev phases (default 3) # sensitivity: 1 # current raise/lower step size (default 10A) enable: # pv mode enable behavior delay: 1m # threshold must be exceeded for this long threshold: 0 # minimum export power (W). If zero, export must exceeds minimum charge power to enable disable: # pv mode disable behavior delay: 5m # threshold must be exceeded for this long threshold: 200 # maximum import power (W) guardduration: 10m # switch charger contactor not more often than this (default 10m) mincurrent: 8 # minimum charge current (default 6A) maxcurrent: 15 # maximum charge current (default 16A)